Hitachi 1 1/2" Rotary Hammer Drill
The HITACHI 1-1/2-Inch Spline Shank Rotary Hammer, 2 Mode quickly chisels through concrete or masonry and drills bolt and rebar holes and channels. The rotary hammer accepts toothed, spline shank bits that hammer at a full-load impact of 2,800 bpm, powered by an 8.4-Amp motor. The Hitachi 1-1/2-inch spline shank rotary hammer has two operating modes, hammer only and hammer and drill, controlled by a turn knob. A safety clutch stops rotation if the bit binds in the hole, eliminating tool kickback. The rotary hammer has a low vibration level of just 18.8 m/s2 under full load, with a noise level of only 95.2 Db, so it's comfortable and safe to handle for long stretches of time. Made of polycarbonate resin and steel, the tool is lightweight at only 14.1 pounds. A dust-resistant cover protects the inner components, and the sealed grease system protects the components from dust and debris.
- Powerful 8.4 Amp motor delivers 950 watts of input power for maximum productivity
- Two modes of operation - hammer only and hammer drilling controlled by the simple turn of a knob
- Produces 5.9 ft/lbs of impact energy for faster drilling and chiseling through concrete
- Low vibration levels of only 18.8m/s2 (full load) for more comfortable operation in hand
- Low noise levels of only 95.2 dB (full load) for a less noisy work environment
- Safety clutch shuts down rotation in the event of a bound bit for improved user protection
- Dust resistant cover protects the tool from dust and debris and prolongs tool life
- Sealed grease system adds to the tools maintenance free operation
- Soft elastomer handle provides a secure grip and absorbs vibration for comfort and control during operation
- Adjustable 360 degree side handle provides better control and can be removed easily
Play Rotary Hammer Drill Video (Similar Product)
1/2" Hitachi Hammer Drill
Makinex Jackhammer Trolley
The fastest, safest way to remove tiles and thinset!
The Jackhammer trolley lets you remove ceramic tiles, thinset, cork and vinyl tiles up to six times faster than any other method. Nothing beats it for speed and efficiency.
Makita Chipping Hammer
Tough on concrete, not on you. Makita’s hard-hitting HM1214C 27 lb. Breaker Hammer is equipped with Anti-Vibration Technology (AVT), an exclusive counterbalance system that reduces vibration. The result is more efficient hitting on the concrete and less vibration in the tool – and the tool user.
The HM1214C with AVT® is engineered to be the most efficient breaker hammer In its class with a 14 AMP motor that provides 950-1,900 BPM and 25.7 joules of impact energy with less vibration. In addition, it has an automatic brush cut-off system that protects the commutator, and a warning indicator lamp for longer tool life.
The HM1214C with AVT® is a hard-hitting breaker hammer for digging, chipping and breaking. Its superior efficiency, versatility and comfort make the HM1214C an ideal breaker hammer for landscapers, pool installers, electricians, plumbers, masons, remodelers, and general contractors seeking a best-in-class industrial quality breaker hammer.
- Powerful 14 AMP motor delivers 19 ft.lbs. of impact energy to handle the most demanding applications
- Anti-Vibration Technology is an internal counterbalance system that greatly reduces vibration and directs more impact energy to the work surface for increased user comfort and greater productivity
- Constant speed control automatically applies additional power to the motor to maintain speed under load to complete the most challenging jobs
- Soft start suppresses start-up reaction for more precision and better accuracy
- Variable speed control dial enables user to match the speed to the application for greater versatility
- L.E.D. service light notifies the user approximately 8 hours before the brushes need to be replaced
- L.E.D. power light indicates switch failure or cord damage
- Extended life brushes are longer for more work between service intervals and less downtime
- Automatic brush cut-off protects commutator from damage for longer tool life
- 12 bit angle settings allow the bit to be set at different positions for operating convenience
Makita 65lb Jack Hammer (Electric)
This AVT® Breaker Hammer from Makita is engineered to hit like an air hammer, but with less noise and vibration. Users benefit from less noise and lower vibration than an air hammer, and zero hassle with an air hose and compressor. The hammer features the latest Advanced AVT® Technology, a synchronized three-component system that more effectively reduces vibration. The internal mechanical counterbalance system, vibration-absorbing housing, and fixed movement handles are engineered for significantly less vibration during concrete breaking applications.
COMFORT: Mechanical counterbalance system greatly reduces vibration, resulting in a low 6.5m/s2
CONTROL: Vibration absorbing housing moves independently of the motor and hammer mechanism
DESIGN: L.E.D. power & service light indicates cord failure or brush replacement warning
CONVENIENCE: Power cord and integrated cord guide which positions the power cord away from working area
